TP-Link TL-MR3420 Wireless N Router with 3G Status Introduction

Category : TL-MR3420

The Status page provides the current status information about the Router. All information is read-only.

TP-Link TL-MR3420 Router Status


TP-LINK TL-WR700N 150Mbps Wireless N Mini Pocket Router Status Introduction

Category : TL-WR700N

The Status page provides the current status information about the Router on AP Mode. All information is read-only.

Status

Firmware Version – The version information of the Router’s firmware.

Hardware Version – The version information of the Router’s hardware.

LAN – This field displays the current settings or information for the LAN, you can configure them in the Network > LAN page.

  • MAC address – The physical address of the Router, as seen from the LAN.
  • IP address – The LAN IP address of the Router.
  • Subnet Mask – The subnet mask associated with LAN IP address.

Wireless – This field displays basic information or status for wireless function, you can configure them in the Wireless > Wireless Settings page.

  • Wireless Mode – The current wireless working mode in use.
  • Wireless Radio – Indicates whether the wireless radio feature of the AP is enabled or disabled.
  • Name (SSID) – The SSID of the AP.
  • Channel – The current wireless channel in use.
  • Mode – The current wireless mode which the Router works on.
  • Channel Width – The current wireless channel width in use.
  • MAC address – The physical address of the Router, as seen from the WLAN.
  • WDS Status – The status of WDS connection.

System Up Time – The length of the time since the Router was last powered on or reset.

Click the Refresh button to get the latest status and settings of the Router.


Tp-Link TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE Status Overview

Category : TL-WA5210G

Selecting Status will enable you to view the AP’s current status and configuration, all of which is read-only.

Status

1. LAN
This field displays the current settings or information for the LAN, including the MAC address, IP address and Subnet Mask.

2. Wireless
This field displays basic information or status for wireless function, including Wireless Radio, SSID, Channel, Mode, and Wireless MAC address.

3. WAN
These parameters apply to the WAN port of the router, including MAC address, IP address, Subnet Mask, Default Gateway and DNS server.

If PPPoE is chosen as the WAN connection type, the Disconnect button will be shown here while you are accessing the Internet.

You can also cut the connection by clicking the button.

If you have not connected to the Internet, just click Connect to establish the connection.

4. Traffic Statistics
This field displays the router’s traffic statistics.

5. System Up Time
The total up time of the router since it was powered on or reset.


TP-LINK TL-ER5120 Load Balance Broadband Routers Status and System Mode

Category : TL-ER5120

1. Tp-Link Router Network Status

The Status page shows the system information, the port connection status and other information related to this Tp-Link Router.

Choose the menu Network→Status to load the following page.

Tp-link Network status
Continue Reading