TP-Link TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router NAT Introduction

Category : TD-W8960N

NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP address for multiple computers on your LAN (Local Area Network).

Note:
When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT for the type of IPoA and IPoE connection (WAN Service), you will see the NAT menu in the Web-based Utility .

Choose “Advanced Setup”->“NAT”, there are three submenus under the main menu: Virtual Servers, Port Triggering and DMZ Host.

Click any of them, and you will be able to configure the corresponding function.

Tp-Link NAT


TP-Link TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router Port Triggering

Category : TD-W8960N

Choose “Advanced Setup”->“NAT”->“Port Triggering, you can set Port Triggering on the screen.

Some applications require that specific ports in the TP-Link Router’s firewall should be opened for access by remote devices.

Port Trigger dynamically opens up the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote device using the triggering ports.

The TP-Link Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the open ports.

A maximum 32 entries can be configured.

Port Triggering Setup

Port Triggering Table:
The table indicates the information about the Port Triggering entries.

Application (Name): This is the name of the Port Triggering. It is exclusive and must be filled.

Trigger: It includes the Protocol and the Start and End value of the Trigger Ports.

Open: It includes the Protocol and the Start and End value of the Open Ports.

WAN Interface: The WAN Service Interface setting the Port Triggering.
Continue Reading


TP-Link TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router NAT Overview

Category : TD-W8960N

NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP address for multiple computers on your LAN (Local Area Network).

Note:
When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT for the type of IPoA and IPoE connection (WAN Service), you will see the NAT menu in the Web-based Utility.

Choose “Advanced Setup”->“NAT”, there are three submenus under the main menu:
Virtual Servers, Port Triggering and DMZ Host.

Click any of them, and you will be able to configure the corresponding function.

Tp-Link NAT


TP-LINK TL-ER5120 Load Balance Broadband Routers NAT Setup

Category : TL-ER5120

NAT (Network Address Translation) is the translation between private IP and public IP,

which allows private network users to visit the public network using private IP addresses.

With the explosion of the Internet, the number of available IP addresses is not enough.

NAT provides a way to allow multiple private hosts to access the public network with one public IP at the same time,

which alleviates the shortage of IP addresses.

Furthermore, NAT strengthens the LAN (Local Area Network) security of the network since

the address of LAN host never appears on the Internet.

NAT Setup

On this page, you can set up the NAT function.

Choose the menu Advanced→NAT→NAT Setup to load the following page.

Tp-Link NAPT
Continue Reading


How NAT Tp-Link Routers Works

1

Category : TP-Link Router

A NAT router stores the IP addresses and port numbers for each connection in its NAT table.

It replaces the source address to its registered IP address, and the source port to a locally unique number.

Tp-Link Nat Works

Please indicate the source reference, the original address:
http://www.tp-linkhome.com/tp-link-router/how-nat-tp-link-routers-works.html


Basic Knowledge of Tp-Link NAT

Category : TP-Link Router

NAT: Network Address Translation

Tp-link NAT

General Features

  • Partition network into internal (private) and external (public) networks
  • Use externally non-unique IP addresses internally
  • Facilitate communication between internal and external systems through network address translation

Continue Reading

Please indicate the source reference, the original address:
http://www.tp-linkhome.com/tp-link-router/basic-knowledge-of-tp-link-nat.html